Moisture-proof knowledge
Moisture in the interior of the pond is a key factor for maintaining moisture and dehumidifier. It is the best match.
Indoor water typically has evaporation of moisture, especially in cases where higher temperatures cause high humidity and a depressed atmosphere when the indoor water temperature is located. At 28 degrees Celsius, water is about 20 kg per 100 mm 2 is evaporated in 1 hour. That means that a standard pool can vaporize 250 kg of water per hour. If the humidity is not controlled, indoor water will be uncomfortable, and semi-tropical can cause heart problems.
1617303373173102.jpg
Moisture is another word of moisture or steam in the air. The more hot the air is, the more water is exposed to the cold surface. The steam is firm and tight, and there is a chlorine in the water with a large quantity. A mixture of warm and chlorine in the pond is caused by the corrosion of black metal and accelerating the destruction. When a chlorine vapor penetrates into the wall of the sink, it begins to destroy the bricks, cement, seams and brick. It improves the growth of the mold, making the building not good for the expensive decor. And the operation froze.
Moisture suitable for the pool, should be between 60 % and 65. Over 70 % air is full of steam and provides an uncomfortable atmosphere. Under 60 % air is too dry.
Moisture is a soul with the quality of the air in the pond, so it must be properly controlled to choose the proper scientific equipment according to investments. The cost will be initial to the operations, repair area, and location of the room.
The starting point is the surface area of the pond, so we can estimate the number of liters of the steam generated every day, then compare that amount to the results of various humidifiers. Perhaps one large humidifier can handle the whole humidity, but based on the actual results for more comprehensive dehumidifier, it is recommended to use a less than two power dehumidifiers.
With automatic control, the special humidifying machine controls the interior properly and humidity does not cause damage. In the interior is too high humidity, the pond is controlled by water droplets on a small roof. In addition, the dehumidifier is treated and guaranteed that the copper pipe of the machine is not eroded by chlorine and is effective to improve the machine's lifetime.
PRODUCT
Industrial dehumidifierDrying dehumidifierRotary dehumidifierIndustrial humidifierFresh air dehumidificationConstant temperature and humidityMobile air conditionerConstant humidity purification machine
VIDEO
Constant temperature humidity machineIndustrial humidifierDrying and dehumidifying machineIndustrial dehumidifierRotary dehumidifierCommercial dehumidifierHoisting dehumidifierMobile air conditioner
SOLUTION
Commercial officeIndustrial manufacturingWarehousing and logisticsPower communicationsHotel apartmentsItem dryingEnvironmental humidification
CASE
Industrial dehumidifier/Commercial dehumidifierRotary dehumidifierDrying and dehumidifying machineIndustrial humidifierFresh air purification/lifting dehumidifierSpecial moisture control equipmentConstant temperature and humidity machineMobile air conditioner
NAISIDA Dehumidifier Website
Service hotline:+8613924801484
Email:naisida_foshan@163.com
Factory address:No. 28, North Lake 1st Road, Luo Village, Shishan Town, Nanhai District, Foshan City, Guangdong Province, China