As with other appliances, the efficiency of dehumidifier decreases over time after the dehumidifier continues to last, but there are also customers who reflect that a new dehumidifier will decrease after two or three months of use.

There's an obstruction in the vent.

Initially, you can breathe 10 cubic meters per minute because the air entry is blocked by things. Now the air entry has only 5 cubic meters per minute, so it is effective to reduce moisture naturally.

1620726392150415.jpg

Dehumidifier 2.

The structure of a mechanism in general reflects the dehumidifying can be customized different models, depending on the need to reduce humidity. However, some users in the purchase of a dehumidifier are considered only by the humidity requirements, while ignored the area and the natural factor of dehumidifying the environment, such as the sea, large rain, and too high humidity humidity, thus must generally be configured to reduce humidity or increase the number of humidifiers.

3. relatively dry environment closed;

Dehumidification typically occurs in a relatively closed environment, in a simple way. It is like a pond with a water on one side, and on the other side is water, and it takes a long time to clean the pond. If the window doors and the relative humidity of the external air are entering, the relative humidity is not rapidly reducing the humidity of the air.

4. droughts environment is lower;

Now, most market humidifiers are dehumidifier by freezing, and there are certain requirements for environmental and humidity temperatures too low during dehumidifying, which will cause the trigger to stop working. The crew is unable to perform wet operations. Defrosting often causes the crews to work under a short term of humidity reduction, resulting in a decreased effect.

Not enough cooling solution 5.

After using the cooling product for a long time, cooling will continue to be used because of why it is not cold to an air conditioner. In the end, the dehumidifier is like an air conditioner due to normal consumption due to insufficient refrigeration and compressor leakage, when it's time to fill up a hole before inserting the cooling liquid.